X20AO4632 B&R X20 Output Module - B&R Supplier in China

Products Mode: X20AO4632

Place of Origin: AT

Inquery Now

Prev Next

Description

X20AO4632 B&R X20 Output Module

MATERIAL NUMBER:

X20AO4632

DESCRIPTION:

4 analog outputs
Either current or voltage signal possible
16-bit digital converter resolution

The module is equipped with 4 outputs with 16-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.

Short description

I/O module	4 analog outputs ±10 V or 0 to 20 mA

General information

B&R ID code	0x1BA5
Status indicators	I/O function per channel, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Channel type	Yes, using software
Power consumption
Bus	0.01 W
Internal I/O	1.8 W (Rev. ≥ J0), 2.2 W (Rev. < J0)
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
EAC	Yes
KC	Yes

Analog outputs

Output	±10 V or 0 to 20 mA, via different terminal connections
Digital converter resolution
Voltage	±15-bit
Current	15-bit
Conversion time	50 µs for all outputs
Settling time on output change over entire range	500 µs
Switch on/off behavior	Internal enable relay for startup
Max. error
Voltage
Gain	0.04%
Offset	0.022%
Current
Gain	0.09%
Offset	0.045%
Output protection	Short-circuit proof
Output format
Voltage	INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV
Current	INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 610.352 nA
Load per channel
Voltage	Max. ±10 mA, load ≥1 kΩ
Current	Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0)
Short-circuit proof	Current limiting ±40 mA
Output filter	First-order low-pass filter / cutoff frequency 10 kHz
Max. gain drift
Voltage	0.01%/°C
Current	0.02 %/°C
Max. offset drift
Voltage	0.012%/°C
Current	0.012%/°C
Error caused by load change
Voltage	Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Current	Max. 0.5%, from 1 Ω → 600 Ω, resistive
Nonlinearity	<0.007%
Insulation voltage between channel and bus	500 V_eff

Electrical properties

Electrical isolation	Channel isolated from bus Channel not isolated from channel

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C (Rev. ≥ J0), 0 to 55°C (Rev. < J0)
Vertical mounting orientation	-25 to 50°C (Rev. ≥ J0), 0 to 50°C (Rev. < J0)
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing