8AC120.60-1 ACOPOS Encoder Interface - B&R Supplier in China

Products Mode: 8AC120.60-1

Place of Origin: AT

Inquery Now

Description

8AC120.60-1 ACOPOS Encoder Interface

8AC120.60-1

EnDat 2.1 encoder interface for installation in ACOPOS servo drives
Encoder monitoring
Also suitable for evaluating simple incremental encoders with sinusoidal input signal

ACOPOS plug-in module, EnDat encoder and sine incremental encoder interface

Module type	ACOPOS plug-in module
B&R ID code	0x0FCC
Slot	Slots 2, 3 and 4
Power consumption
Depends on connected encoder	Yes
E0 ... EnDat single-turn, 512 lines	Max. 2.3 W
E1 ... EnDat multi-turn, 512 lines	Max. 3.1 W
E2 ... EnDat single-turn, 32 lines (inductive)	Max. 3.1 W
E3 ... EnDat multi-turn, 32 lines (inductive)	Max. 3.1 W
E4 ... EnDat single-turn, 512 lines	Max. 2.4 W
E5 ... EnDat multi-turn, 512 lines	Max. 2.7 W
E8 ... EnDat single-turn, 16 lines (inductive)	Max. 2.9 W
E9 ... EnDat multi-turn, 16 lines (inductive)	Max. 3.1 W
EA ... EnDat single-turn, 32 lines (inductive)	Max. 2.7 W
EB ... EnDat multi-turn, 32 lines (inductive)	Max. 3.0 W
Certifications
CE	Yes
UL	cULus E225616 Power conversion equipment
KC	Yes

Quantity	1
Module-side connection	15-pin female DSUB
Status indicators	UP/DN LEDs
Electrical isolation
Encoder - ACOPOS	No
Encoder monitoring	Yes
Max. encoder cable length	50 m
Encoder power supply
Output voltage	Typ. 5 V
Load capacity	250 mA
Sense lines	2, compensation of max. 2x 0.7 V
Sine/Cosine inputs
Signal transmission	Differential signals, symmetrical
Signal frequency (-3 dB)	DC up to 300 kHz
Signal frequency (-5 dB)	DC up to 400 kHz
Differential voltage	0.5 to 1.25 V_ss
Common-mode voltage	Max. ±7 V
Terminating resistor	120 Ω
Resolution	16384 * Number of encoder lines
Accuracy	-
Reference input
Signal transmission	Differential signal, symmetrical
Differential voltage for low	≤-0.2 V
Differential voltage for high	≥+0.2 V
Common-mode voltage	Max. ±7 V
Terminating resistor	120 Ω
Serial interface
Signal transmission	Synchronous
Protocol	RS485
Baud rate	625 kbaud