X20BR9300 X2X Link Bus Receiver B&R Supplier in China

Products Mode: X20BR9300

Place of Origin: AT

Inquery Now

Prev Next

Description

X20BR9300 X2X Link Bus Receiver B&R

MATERIAL NUMBER:

X20BR9300

DESCRIPTION:

X2X Link bus receiver
Feed for X2X Link and internal I/O supply
Electrical isolation of feed and X2X Link supply
Redundancy of X2X Link supply possible by operating multiple supply modules simultaneously
Operation only on the slot to the far left

The bus receiver is used to connect the X20 System to the X2X Link. The module is equipped with a feed for the X2X Link as well as the internal I/O supply.

Short description

Bus receiver	X2X Link bus receiver with supply for I/O and bus

General information

B&R ID code	0x1BC1
Status indicators	X2X bus function, overload, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Overload	Yes, using LED status indicator and software
X2X bus function	Yes, using LED status indicator
Power consumption for X2X Link power supply	1.62 W
Power consumption
Internal I/O	0.6 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
EAC	Yes
KC	Yes

X2X Link power supply input

Input voltage	24 VDC -15% / +20%
Input current	Max. 0.7 A
Fuse	Integrated, cannot be replaced
Reverse polarity protection	Yes

X2X Link power supply output

Nominal output power	7 W
Parallel connection	Yes
Redundant operation	Yes
Overload characteristics	Short-circuit proof, temporary overload

Input I/O power supply

Input voltage	24 VDC -15% / +20%
Fuse	Required line fuse: Max. 10 A, slow-blow
Reverse polarity protection	No

Output I/O power supply

Nominal output voltage	24 VDC
Behavior on short circuit	Required line fuse
Permissible contact load	10 A

Electrical properties

Electrical isolation	X2X Link supply isolated from X2X Link power supply I/O supply not isolated from I/O power supply

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately. Order 1x power supply bus module X20BM01 separately
Pitch	12.5^+0.2mm

Encoders

Electronic/Controls

Hydraulic and Pneumatic

Brands

Other Products